6500$
OFF

Tear Off Prices Per Square` - Roofing - Contractor Talk

For example, last year we did a 18 square two layer tear off. Not to steep, but pretty tall. Our bid was just shy of $6000. The lady we did the roof for told me later that we could have charged $6500 and still won the bid because the two other bids were $7000 and $8500.

OFFER

4 Sale Lumber And Osb Plywood For 1/2 Price In Nj ...

4 Sale Lumber And Osb Plywood For 1/2 Price In Nj hey guys i have a bunch of new lumber 2x4s,6,some 2x8s and 12s i got 1/2 osb like 200 sheets and like 200 of 3/4 their just taking up space in my yard for sale 1/2 price 609-977-0730 Warning: The topics ...

OFFER

Glass House Demolition - Demolition - Contractor Talk

Glass handrail? those look nice on modern houses, but it is a pain to move it all and store it. I recently tore a deck off of a waterfront house, but they asked us to disassemble it. We used at least 20 moving blankets to pad it, and took about 2 hours to disassemble it fully.

OFFER

I Need Parts For A Stone Mixer - Masonry - Contractor Talk

Re: I Need Parts For A Stone Mixer got the blocks today, but do you guys think that was the problem with my mixer. I had a batch in it that was on the dry side, and the blades stop and somewhere from the gear area, there is this grinding sound.I took it out of gear as soon as i could and it stopped grinding.

OFFER

Outlets Vertical Or Horizontal - Electrical - Contractor Talk

Outlets Vertical Or Horizontal Is there any reason why you see some outlets installed horizontally and other vertically? Warning: The topics covered on this site include activities in which there exists the potential for serious injury or death. ContractorTalk.com DOES NOT guarantee the accuracy or completeness of any information contained on ...

OFFER

Multimaster Blades - Tools & Equipment - Contractor Talk

I am getting killed with the cost of Fein Blades for the Multimaster. What is the consensus on the board for the best and most cost effective blades on the market. I been using the Fein blades but the cost is just out of hand. I purchased a few Bosh blades today at HD. the cost was some what lower than fein but am not sure about the quality.

OFFER

CPO Outlets - Tools & Equipment - Contractor Talk

Re: CPO Outlets I suspect most of the stuff sold as refurbished is simply brand new units that have cosmetic flaws from the factory. Sometimes you can get something that has been used, sent back and actually refurbished before selling it on, but I bet most of it has never been in the hands of a user.

OFFER

Is The Harbor Freight 18 Gauge Brad Air Nailer OK ? - Page ...

tried the gun today . it would fire every time the trigger was pulled , but would misfire fairly often , would set 6-8 brads (2 inch hitachi galvanized) then leave a few proud a 1/8 to a 1/4 inch . topped the tank off , put the 2x4 scrap in back and went to HF and swapped for another one . tried it in the parking lot and had the same result . got my money back no ...

OFFER

TrafficMaster Allure Tips & Any Good? - Flooring ...

I''ve never used TrafficMaster Allure and would like to know if it holds up to wear and if the planks stay stuck together. If I go with this product it will be installed in a rental property so it needs to be tough??? Also I''d like to pick up any tips from anybody who''s got some good experience with it.

OFFER

Budget Framing Nailer - Tools & Equipment - Contractor Talk

I''m not trying to sound like a complete fool here but I''m tempted to pick up a cheap framing nailer. I do VERY little at work with one, I always build my little stractures with steel, screws or pinners and glue, this will be moreless for renovating my own home. ... If it shoots a nail into wood successfuly i''m happy.

OFFER

Andersen Windows At Home Depot - Page 2 - Windows, Siding ...

Re: Andersen Windows At Home Depot Mike, What I was trying to say is that it isnt like HD is only getting jobs because they are cheap. If you are losing jobs to HD, it isnt because of them offering the best price, it is because you arent doing something right.

OFFER

Electrical For Fireplace Insert - Electrical - Contractor Talk

In my house I am removing an old fireplace insert with a blower fan, so there is an existing wire ran to the firebox. The new insert will need electrical too, so I thought I was all set. However as I was looking at it today, I notice on the wire it say 18/3. Turning off the 15 amp breaker in the panel shows this wire shares power with 4 other ...

OFFER

Designer Epoxy With Metallic (Epoxyplus?) - Flooring ...

I'm here. Are you looking at a metallic epoxy? You can use any metallic pigment and any 2 part epoxy, preferably one that has an accelerator you can add. 8 hr dry time leaves a lot of time for your floor to get ruined. look for an epoxy supplier like jon don, or order from manufacturer like envirofloors efs100 for primer and esf200 for topcoat.

15%
OFF

Bostitch Discounts - Tools & Equipment - Contractor Talk

15% off all new tools through April 3rd at CPO Bostitch . Use code "bostitch15" at checkout. They're also offering instant rebates on their cordless guns. Dunno if the discounts a€

OFFER

Contractor Discounts At Lowes? - Page 3 - Carpentry ...

Re: Contractor Discounts At Lowes? The best way to get consistent low prices is to do a large volume of business at a local supplier, not lowes or home depot. You will be able to easily form a friendly relationship with your local supplier and they will always give you the lowest possible price.

OFFER

Plaster Repair - Drywall - Contractor Talk

I've had very good results re attaching loose plaster with Big Wallys Plaster Magic. I know, it sounds dumb but it's a good system. It looks to be a pretty (new) standard approach for plaster repair, so it should be good. The old way of using metal plaster washers isn't as good, IMO, and takes a lot longer because of the surface build up ...

OFFER

Festool Reconditioned Sale - Tools & Equipment ...

Warning: The topics covered on this site include activities in which there exists the potential for serious injury or death.ContractorTalk.com DOES NOT guarantee the accuracy or completeness of any information contained on this site. Always use proper safety precaution and reference reliable outside sources before attempting any construction or remodeling task!

OFFER

Materials Cost Up Front - General Discussion - Contractor Talk

Dont start a job unless they are good customers until you have half your job cost up front. My formula is 25 to get on the calender 25 when materials arrive 25 when drywall is up and 25 when done. It may be kosher at the begining but wait until you work for a lawyer.

OFFER

Cheapest Siding Material (that Is Not Vinyl Siding ...

Why not vinyl? IMO the trim is what makes vinyl look cheap, well that and the seams but the seams are evident. In fact panels can be bought in 12'-16' and maybe longer depending on local supplies. Vinyl is more final than many of the other options, Pressboard a€

OFFER

Xactimate Pricing, Please. - Roofing - Contractor Talk

Before I got Xactimate I gathered as many estimates together as possible and made my estimate based of the estimates. A lot more work than Xactimate but most insurance adjusters paid off the price list. The last two adjusters adjusters said the most they pay on easy walkable roofs is a€

OFFER

Best Continuing Education Classes - Contractor Licensing ...

Warning: The topics covered on this site include activities in which there exists the potential for serious injury or death.ContractorTalk.com DOES NOT guarantee the accuracy or completeness of any information contained on this site. Always use proper safety precaution and reference reliable outside sources before attempting any construction or remodeling task!

11%
OFF

Double Rebate At Menards!! - Tools & Equipment ...

If you really are paying attention, purchasing items from there weekly fliers at typically good sales when you know an 11% is coming you can do really well. Just before this sale started a floor I needed was over 30% off, picked it up early, send in the early rebate and I made another 40% percent on my material, on top of my mark up.

OFFER

Harbor Freight Wood Splitter - Tools & Equipment ...

Warning: The topics covered on this site include activities in which there exists the potential for serious injury or death.ContractorTalk.com DOES NOT guarantee the accuracy or completeness of any information contained on this site. Always use proper safety precaution and reference reliable outside sources before attempting any construction or remodeling task!

OFFER

Home Depot Bid Room - Business - Contractor Talk

Using the Home Depot Bid Room is a great way to find out how much they are marking up each item. Some materials such as 2x4 and drywall have very little to no markup. Others are market up as much as 200%. I would like to create a list of these items with a high markup.

OFFER

Andersen Windows At Home Depot - Windows, Siding And Doors ...

Any Andersen product from Home Depot is the exact same thing you can buy from a local lumberyard. Andersen has 'Circle of Excellence' Dealers that purchase large amounts of Andersen products and are very competitive. I purchase from a local lumberyard that is a circle of excellence dealer. ... Andersen are ok but FAR from a great window ...

OFFER

Painters Pants - Painting & Finish Work - Contractor Talk

Painters pants I get at the Benjamin Moore store they carry Stan Ray which I have my complaints. years ago I use to get Senterians these pants where great had doubled knees two side pockets double back pockets, a watch pocket, a hammer loop on side and loop on the back between the pockets. it was like haveing a tool pouch built in your pants.

8000$
OFF

Contractor Discounts At Lowes? - Page 2 - Carpentry ...

Did a "budget" whole house rehab earlier this year and submitted nearly $8000 worth of windows/doors etc. and they got marked down $300.....so I used a Lowe's coupon to get 10% off instead. My local lumberyard regularly gives contractor discounts, my local plumbing supply house has decent prices and only does business with contractors.

15%
OFF

Contractor Discounts At Lowes? - Carpentry - Contractor Talk

Are general contractors given a discount at Lowe's? If so, what %. We receive 15% from the local yards. ... I don't think either blowes or home cheapo give contractor discounts. I did however recently see a discount on paint at home cheapo, but it requires that you buy a specific amount. ... I can get it for a 1/3 of the price easily elsewhere.

Related Searches

Horizontal To Vertical Outlet

Stone Mortar Mixer For

Plywood Osb For Sale

Discount Fein Multimaster Blades

Harbor Freight Brad Nailer

Xactimate Discount Subscription Adjusters

Trafficmaster Allure Discounts

Home Depot Andersen Windows

Home Depot Plywood For

Home Depot Outlet Adapter

Cheap Vinyl Windows For

Used Festools For Sale

Paslode Framing Nailer For

Fireplace Insert Outlet

Used Vinyl Windows For

Cpo Tool Outlet

Big Cheap Houses For

Discount Andersen Windows Sale

Fireplace For Sale Cheap

Stone Mortar Mixers For